Kubota L2800 Workshop Manual page 237

L2800, L3400, WSM
Tractor Manuals Scotland
Wirings (L.H)
1. Disconnect the wiring (2) for alternator.
2. Disconnect the wiring (3) for starter motor.
3. Disconnect the 1P connector (5) for engine oil switch.
4. Remove the shutter plate (4).
5. Remove the slow blow fuse (1).
(1) Slow Blow Fuse
(2) Wiring for Alternator
(3) Wiring for Starter Motor
Wirings (R.H)
1. Disconnect the wiring (1) for the fuel sensorr.
2. Disconnect the starter relay (2), OPC timer (3), glow relay (4) and
flasher unit (5).
3. Disconnect the wiring (6) for glow plug and water temperature
sensor.
4. Disconnect the wiring (7) for engine stop solenoid.
(1) Wiring for Fuel Sensor
(2) Starter Relay
(3) OPC Timer
(4) Glow Relay
Pipe and Wirings
1. Remove the HST return pipe (1).
2. Remove the fuse box (4) and ground cable (5).
3. Disconnect the connector (3) for safety switch.
4. Remove the clutch housing cover (2).
(When reassembling)
Tightening torque
(1) Return Pipe
(2) Clutch Housing Cover
(3) Connector for Safety Switch
Tractor Manuals Scotland - Please Do Not Copy
H3-S14
TRANSMISSION (HST TYPE)
(4) Shutter Plate
(5) 1P Connector
(5) Flasher Unit
(6) Wiring For Glow Plug and Water
Temperature Sensor
(7) Wiring for Engine Stop Solenoid
88 to 98 N·m
HST Return pipe joint bolt 9.0 to 10 kgf·m
65.0 to 72.2 ft-lbs
(4) Fuse Box
(5) Ground Cable
W1045710
W1046003
W1043042
KiSC issued 08, 2007 A