Operator Presence Control (Opc) System; Seat Belt - Kubota M7132 Operator's Manual

OPERATOR'S POSITION CONTROLS
(1) RH armrest
(2) Lock handle
Swivel adjustment
Unlock the swivel adjust lever and rotate the seat right
or left as desired.
NOTE :
Using the swivel seat:
• Swivel the seat to the right and left to position
yourself comfortably for jobs in which you need
to look rearwards.
• Turn the seat to the left to facilitate getting in
and out of the tractor.
• The seat can swivel in both directions.
Standard model
(1) Swivel adjust lever
M7132, M7152, M7172
(A) "HIGH"
(B) "LOW"
(C) "LOCK POSITION"
(D) "UNLOCK POSITION"
Premium, Premium KVT models
(1) Swivel adjust lever
2. Operator presence control (OPC)
system
The tractor is equipped with a system which stops the
PTO and activates a warning buzzer.
This system functions according to the conditions
below.
When the tractor is stopped:
• Even if the PTO clutch control switch is engaged,
the PTO will not start if the operator is standing up
from the operator's seat.
• If the key switch is at "ON" position (engine running
or not) and the parking brake is not applied,
standing up from the operator's seat will set off the
warning buzzer.
• If the engine is running, standing up from the
operator's seat will stop the PTO.
When the tractor is moving:
• Standing up from the operator's seat will set off the
warning buzzer and the PTO will continue rotating.

3. Seat belt

WARNING
To avoid personal injury or death:
• Always use the seat belt when a ROPS or CAB
is installed.
Adjust the seat belt for proper fit and connect the
buckle. This seat belt is auto-locking retractable type.
OPERATING THE TRACTOR
145