Hydraulic Cylinder - Kubota L2800 Workshop Manual

L2800, L3400, WSM

(3) Hydraulic Cylinder

Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
Clearance between Bushing and Gear Shaft
1. Measure the gear shaft O.D. with and outside micrometer.
2. Measure the bushing I.D. with and inside micrometer or cylinder
gauge, and calculate the clearance.
3. If the clearance exceeds the allowable limit, replace the gear
shaft and the bushings as a unit.
Clearance between
bushing and gear shaft
Gear shaft O.D.
Bushing I.D.
Side Plate Thickness
1. Measure the side plate thickness with an outside micrometer.
2. If the thickness is less than the allowable limit, replace it.
Side plate thickness
Hydraulic Cylinder Bore
1. Check the cylinder internal surface for scoring or damage.
2. Measure the cylinder I.D. with a cylinder gauge.
3. If the measurement exceeds the allowable limit, replace.
Cylinder I.D.
8-S23
HYDRAULIC SYSTEM
0.020 to 0.081 mm
Factory spec.
0.0008 to 0.0032 in.
0.15 mm
Allowable limit
0.0059 in.
14.970 to 14.980 mm
Factory spec.
0.5894 to 0.5898 in.
15.000 to 15.051 mm
Factory spec.
0.5906 to 0.5926 in.
2.48 to 2.50 mm
Factory spec.
0.0976 to 0.0984 in.
2.40 mm
Allowable limit
0.0945 in.
75.000 to 75.050 mm
Factory spec.
2.9528 to 2.9547 in.
75.150 mm
Allowable limit
2.9587 in.
W1025233
W1023824
W1026023
KiSC issued 08, 2007 A