Disassembling And Assembling; Starter - Kubota L2800 Workshop Manual

L2800, L3400, WSM

[2] DISASSEMBLING AND ASSEMBLING

(1) Starter

Tractor Manuals Scotland
Disassembling Motor
1. Disconnect the connecting lead (9) from the magnet switch (8).
2. Remove the screws (6), and then separate the end frame (4),
yoke (2) and armature (1).
3. Remove the two screws (5), and then take out the brush holder
(3) from the end frame (4).
(When reassembling)
• Apply grease to the spline teeth (A) of the armature (1).
(1) Armature
(2) Yoke
(3) Brush Holder
(4) End Frame
(5) Screw
(6) Screw
Disassembling Magnet Switch
1. Remove the drive end frame (1) mounting screws.
2. Take out the overrunning clutch (2), ball (3), spring (4), gears (5),
rollers (6) and retainer (7).
(When reassembling)
• Apply grease to the gear teeth of the gears (5) and overrunning
clutch (2), and ball (3).
(1) Drive End Frame
(2) Overrunning Clutch
(3) Ball
(4) Spring
Plunger
1. Remove the end cover (1).
2. Take out the plunger (2).
(1) End Cover
Tractor Manuals Scotland - Please Do Not Copy
9-S22
ELECTRICAL SYSTEM
(7) Nut
(8) Magnet Switch
(9) Connecting Lead
A : Spline Teeth
W10162880
(5) Gear
(6) Roller
(7) Retainer
W10167280
(2) Plunger
W10168830
KiSC issued 08, 2007 A