Kubota L2800 Workshop Manual page 295

L2800, L3400, WSM
Tractor Manuals Scotland
Differential Gear
1. Remove the differential case cover mounting screws (9) and then
take out the differential case cover (5), ball bearing (6) and spiral
bevel gear (7) as a unit.
2. Remove the external snap ring (8), and then remove the ball
bearing (6) and spiral bevel gear (7) as a unit with a puller.
3. Remove the straight pin (13).
4. Pull out the pinion shaft (10) and take out the differential pinions
(4) and differential side gears (12).
NOTE
• Arrange the parts to know their original position.
(When reassembling)
• Apply molybdenum disulfide (Three Bond 1901 or equivalent) to
the inner circumferential surface of the differential side gears (12)
and differential pinions (4).
• Install the pinion shaft (10) so that the hole on it may align with
the hole on differential case (2), and install the straight pin (13).
Tightening torque
(1) Shim
(2) Differential Case
(3) Thrust Collar
(4) Differential Pinion
(5) Differential Case Cover
(6) Ball Bearing
(7) Spiral Bevel Gear
Tractor Manuals Scotland - Please Do Not Copy
6-S16
48.1 to 55.9 N·m
Differential case cover
4.9 to 5.7 kgf·m
mounting screw
35.4 to 41.2 ft-lbs
(8) External Snap Ring
(9) Screws
(10) Pinion Shaft
(11) Shim
(12) Differential Side Gear
(13) Straight Pin
FRONT AXLE
W1017053
KiSC issued 08, 2007 A