Hydraulic Pump Test Using Flow-Meter (Three Point Hydraulic System) - Kubota L2800 Workshop Manual

L2800, L3400, WSM

(3) Hydraulic Pump Test Using Flow-meter (Three Point Hydraulic System)

Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
Preparation
1. Remove the support (3) mounting screw.
2. Remove the screw (2).
3. Remove the joint shaft (1).
(When reassembling)
• Lift the universal joint so that there should be a clearance (A) of
more than 5 mm (0.19 in.) between the universal joint and
flywheel housing.
Then fit the support (3) in position.
(1) Joint Shaft
(2) Screw
(3) Support
8-S9
HYDRAULIC SYSTEM
(A) Clearance
W1019601
KiSC issued 08, 2007 A