Kubota L2800 Workshop Manual page 54

L2800, L3400, WSM
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
Flush Cooling System and Changing Coolant (HST Type)
(Continued)
NOTE
• The above
necessitate a minimum glycol content in the concentrates
anti-freeze.
• When the coolant level drops due to evaporation, add water
only. In case of leakage, add anti-freeze and water in the
specified mixing ratio.
• Anti-freeze absorbs moisture. Keep unused anti-freeze in a
tightly sealed container.
• Do not use radiator cleaning agents when anti-freeze has
been added to the coolant. (Anti-freeze contains an anti-
corrosive agent, which will react with the radiator cleaning
agent forming sludge which will affect the engine parts.)
Coolant (recovery tank)
Replacing Fuel Hose
1. Replace the fuel hoses and clamps.
Refer to "Checking Fuel Line". (See page G-27.)
Replacing Radiator Hose (Water Pipes)
1. Replace the hoses and clamps.
Refer to "Checking Radiator Hose and HOse Clamp". (See
page G-30.)
Replacing Air Hose
1. Replace the air hose and clamps.
Refer to "Checking Intake Air Line". (See page G-31.)
Replacing Power Steering Hose
1. Replace the hoses and clamps.
Steering Line" in every 200 hours maintenance.)
Replacing HST Oil Line (HST Type)
1. Replace the hoses and clamps. (See "Checking HST Oil Line"
in every 200 hours maintenance.)
G-37
date represent industry
Capacity
(See "Checking Power
G GENERAL
standards that
0.6 L
0.63 U.S.qts
0.53 Imp.qts
W1045113
W1056937
W1057415
W1046774
W1046898
W1046969
KiSC issued 08, 2007 A