Checking The Engine Start System [Hst Type]; Checking The Operator Presence Control - Kubota L2501 Operator's Manual

PERIODIC SERVICE
(1) Clutch pedal
(2) Range gear shift lever (Shut-
tle shift lever)
Test of switch for the range gear shift lever
1. Sit on the operator's seat.
2. Shift the range-gear-shift-lever to the [L], [H], or [R]
position.
3. Depress the clutch pedal fully.
4. Disengage the PTO-gear-shift-lever.
5. Turn the starter key to the "START" position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the range-gear-shift-lever.
Test of switch for the PTO gear shift lever
1. Sit on the operator's seat.
2. Engage the PTO-gear-shift-lever.
3. Depress the clutch pedal fully.
4. Shift the range-gear-shift-lever to the neutral
position.
5. Turn the starter key to the "START" position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the PTO-gear-shift-lever.
4. Checking the engine start system
[HST type]
WARNING
To avoid personal injury or death:
• Do not allow anyone near the tractor while
testing.
• If the tractor does not pass the test, do not
operate the tractor.
Preparation before testing
1. Place all the control levers in the "NEUTRAL"
position.
2. Set the parking brake and stop the engine.
3. Lower all the implements.
86
(3) PTO gear shift lever (1) Speed control pedal
(2) Clutch pedal
Test of switch for the speed control pedal
1. Sit on the operator's seat.
2. Depress the speed-control-pedal to the desired
direction.
3. Depress the clutch pedal fully.
4. Disengage the PTO-gear-shift-lever.
5. Turn the starter key to the "START" position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the speed-control-pedal.
Test of switch for the PTO gear shift lever
1. Sit on the operator's seat.
2. Engage the PTO-gear-shift-lever.
3. Depress the clutch pedal fully.
4. Place the speed-control-pedal in the neutral
position.
5. Turn the starter key to the "START" position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the PTO-gear-shift-lever.
Test of switch for the clutch pedal
1. Sit on the operator's seat.
2. Disengage the PTO-gear-shift-lever.
3. Place the speed-control-pedal in the "NEUTRAL"
position.
4. Release the clutch pedal.
5. Turn the starter key to the "START" position.
6. Make sure that the engine does not crank.
7. If the engine cranks, consult your local KUBOTA
dealer for servicing the clutch pedal.
5. Checking the operator presence
control
Check if the engine shuts off when you stand up from
the operators seat.
WARNING
To avoid personal injury or death:
SERVICE EVERY 50 HOURS
(2) PTO gear shift lever
L2501