Battery; Fuse; Connector - Kubota L2800 Workshop Manual

L2800, L3400, WSM

[2] BATTERY

[3] FUSE

[4] CONNECTOR

Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
• Take care not to confuse positive and negative terminal posts.
• When removing battery cables, disconnect negative cable first.
When installing battery cables, check for polarity and connect
positive cable first.
• Do not install any battery with capacity other than is specified
(Ah).
• After connecting cables to battery terminal posts, apply high
temperature grease to them and securely install terminal covers
on them.
• Do not allow dirt and dust to collect on battery.
CAUTION
• Take care not to let battery liquid spill on your skin and
clothes. If contaminated, wash it off with water immediately.
• Before recharging the battery, remove it from the machine.
• Before recharging, remove cell caps.
• Do recharging in a well-ventilated place where there is no
open flame nearby, as hydrogen gas and oxygen are formed.
• Use fuses with specified capacity.
Neither too large or small capacity fuse is acceptable.
• Never use steel or copper wire in place of fuse.
• Do not install working light, radio set, etc. on machine which is not
provided with reserve power supply.
• Do not install accessories if fuse capacity of reserve power
supply is exceeded.
(1) Fuse
• For connector with lock, push lock to separate.
(A) Push
G-5
G GENERAL
W1011816
(2) Fusible Link
W1012092
W1012211
KiSC issued 08, 2007 A