Disassembling And Assembling; Clutch Housing Case - Kubota L2800 Workshop Manual

L2800, L3400, WSM

[2] DISASSEMBLING AND ASSEMBLING

(1) Clutch Housing Case

Tractor Manuals Scotland
Brake Case
1. Loosen and remove the brake case mounting screws and nuts.
2. Separate the brake case, tapping the brake case lever lightly.
(When reassembling)
• Apply grease to the brake ball seats.
excessively.).
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
face of the brake case and transmission case, after eliminating
the water, oil and stuck liquid gasket.
• Before installing the brake case to the transmission case, install
the cam plate to the transmission case.
• Apply liquid lock (Three Bond 1324 or equivalent) to "(A), (B),
(C), (D)" portions of the stud bolts, RH and LH.
Tightening torque
Speed Change Cover
1. Remove the speed change cover (1).
(When reassembling)
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
face of speed change cover and clutch housing.
Tightening torque
(1) Speed Change Cover
Tractor Manuals Scotland - Please Do Not Copy
3-S14
TRANSMISSION (MANUAL TYPE)
38.2 to 45.1 N·m
Brake case mounting
3.9 to 4.6 kgf·m
stud bolts
28.2 to 33.3 ft-lbs
77.5 to 90.2 N·m
Brake case mounting
7.9 to 9.2 kgf·m
screws and nuts
57.1 to 66.5 ft-lbs
62.8 to 72.5 N·m
Brake case mounting
6.4 to 7.4 kgf·m
lever shaft screw
46.3 to 53.5 ft-lbs
23.6 to 27.4 N·m
Speed change cover
2.4 to 2.8 kgf·m
mounting screw
17.4 to 20.3 ft-lbs
(Do not grease
W1016886
W1014296
KiSC issued 08, 2007 A