Kubota L2800 Workshop Manual page 278

L2800, L3400, WSM
[2] 4WD TYPE
(1) Bevel Gear Case
(2) Bevel Gear
(3) Front Axle Case
(4) Differential Yoke Shaft
(5) Spiral Bevel Gear
(6) Collar
The front axle of the 4WD type is constructed as shown above. Power is transmitted from the transmission through
the propeller shaft (24) and to the spiral bevel pinion shaft (21), then to the spiral bevel gear (5) after that to the
differential gear.
The power through the differential is transmitted to the differential yoke shaft (4), and to the bevel gear shaft (15)
in the bevel gear case (1).
The revolution is greatly reduced by the bevel gears (17), (13), then the power is transmitted to the axle (12).
The differential system allows each wheel to rotate at a different speed to make turning easier.
Tractor Manuals Scotland
(7) Front Axle Bracket, Front
(8) Differential Pinion
(9) Differential Case
(10) Axle Flange
(11) Collar
(12) Axle
Tractor Manuals Scotland - Please Do Not Copy
(13) Bevel Gear
(14) Bevel Gear
(15) Bevel Gear Shaft
(16) Front Gear Case
(17) Bevel Gear
(18) Differential Side Gear
6-M2
FRONT AXLE
(19) Pinion Shaft
(20) Differential Assembly
(21) Spiral Bevel Pinion Shaft
(22) Front Axle Bracket, Rear
(23) Coupling
(24) Propeller Shaf
KiSC issued 08, 2007 A