Alternator - Kubota L2800 Workshop Manual

L2800, L3400, WSM

(2) Alternator

Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
Pulley
1. Secure the hexagonal end of the pulley shaft with a double-
ended ratchet wrench as shown in the figure, loosen the pulley
nut with a socket wrench and remove it.
(When reassembling)
Tightening torque
Rear End Cover
1. Unscrew the three rear end cover screws and the B terminal nut,
and remove the rear end cover.
Brush Holder
1. Unscrew the two screws holding the brush holder, and remove
the brush holder (1).
(1) Brush Holder
IC Regulator
1. Unscrew the three screws holding the IC regulator, and remove
the IC regulator (1).
(1) IC Regulator
9-S23
ELECTRICAL SYSTEM
58.3 to 78.9 N·m
Pulley nut 5.95 to 8.05 kgf·m
43.0 to 58.2 ft-lbs
W10187280
W10189820
W10190540
W10191230
KiSC issued 08, 2007 A