L2800, L3400, WSM
(10) Lighting Switch
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
Head Light Switch Continuity when Setting Switch at OFF
Position
1. Disconnect the connector 8P from the combination switch.
2. Set the light switch to the OFF position.
3. Measure the resistance with an ohmmeter across the B1 terminal
to the T terminal, the B1 terminal to the 1 terminal and the B1
terminal to the 2 terminal.
4. If infinity is not indicated, renew the switch.
Resistance (Switch
at OFF position)
(A) Combination Switch Side
Connector 8P
Head Light Switch Continuity when Setting Switch at ON1
Position
1. Measure the resistance with an ohmmeter across the B1 terminal
to the T terminal and the B1 terminal to the 1 terminal.
2. If 0 ohm is not indicated, renew the head light switch.
Resistance (Switch
at HI-BEAM
position)
(A) Combination Switch Side
Connector 8P
Head Light Switch Continuity when Setting Switch at ON2
Position
1. Measure the resistance with an ohmmeter across the B1 terminal
to the T terminal and the B1 terminal to the 2 terminal.
2. If 0 ohm is not indicated, renew the head light switch.
Resistance (Switch
at LO-BEAM
position)
(A) Combination Switch Side
Connector 8P
9-S19
ELECTRICAL SYSTEM
B1 terminal - T terminal
B1 terminal - 1 terminal
Infinity
B1 terminal - 2 terminal
B1 terminal - T terminal
0 Ω
B1 terminal - 1 terminal
B1 terminal - T terminal
0 Ω
B1 terminal - 2 terminal
W1050507
W1052500
W1053324
KiSC issued 08, 2007 A