Checking, Disassembling And Servicing; Checking And Adjusting - Kubota L2800 Workshop Manual

L2800, L3400, WSM

4. CHECKING, DISASSEMBLING AND SERVICING

[1] CHECKING AND ADJUSTING

Tractor Manuals Scotland
Adjusting Clutch Pedal Free Travel (L2800)
1. Stop the engine and remove the key.
2. Slightly depress the clutch pedal and measure free travel at top
of pedal stroke.
3. If adjustment is needed, loosen the lock nut (1), and turn the turn
buckle (2) to adjust the clutch pedal free travel within factory
specification.
4. Retighten the lock nut (1).
Clutch pedal free travel
(1) Lock Nut
Adjusting Clutch Pedal Free Travel (L3400)
1. At first adjust the clutch pedal free travel, as is mentioned above.
2. Remove the cover located on the right side of flywheel housing
case.
3. Loosen the lock nut (1), tighten the adjust bolt (2) by using 6 mm
spanner until head of the bolt contacts pressure plate slightly.
Make 7/6 turn counterclockwise to give 1.4 to 1.5 mm (0.055 to
0.059 in.) clearance.
4. Tighten the lock nut (1), holding the adjusting bolt (2).
5. Turn the flywheel to adjust the clearance of other adjusting bolts
(three bolts).
6. Repeat step 3 and readjust clutch pedal free travel if necessary.
Clearance (A) between
pressure plate and
adjusting bolt
Tightening torque
(1) Lock Nut
(2) Adjusting Bolt
Tractor Manuals Scotland - Please Do Not Copy
2-S6
20 to 30 mm
Factory spec.
0.8 to 1.2 in.
(2) Turnbuckle
0.95 to 1.00 mm
Factory spec.
0.037 to 0.039 in.
15.7 to 21.6 N·m
Lock nut 1.6 to 2.2 kgf·m
11.6 to 15.9 ft-lbs
A : Clearance
B : 6 mm (0.24 in.)
CLUTCH
W1011840
W1014671
KiSC issued 08, 2007 A