Charging System - Kubota L2800 Workshop Manual

L2800, L3400, WSM

(8) Charging System

Tractor Manuals Scotland
Glow Relay
1. Turn the main switch off.
2. Disconnect the 4P connector from glow relay.
3. Measure the voltage across the terminal 3 (Positive) and chassis
(Negative).
4. If the voltage differs from the battery voltage, the wiring harness
is faulty.
5. Turn the main switch on.
6. Measure the voltage across the terminal 1 (Positive) and chassis
(Negative).
7. If the voltage differs from the battery voltage, the wiring harness
is faulty.
(1) Glow Relay
Alternator
1. Disconnect the 2P connector (3) from alternator after turning the
main switch OFF.
2. Perform the following checkings.
(1) B Terminal
(2) Alternator
Tractor Manuals Scotland - Please Do Not Copy
9-S16
ELECTRICAL SYSTEM
A : Connector of Wire Harness Side
B : Conector of Flow Relay
W1056501
(3) 2P Connector
W1027725
KiSC issued 08, 2007 A