Kubota L2800 Workshop Manual page 196

L2800, L3400, WSM
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
Pinion Shaft
1. Remove the pinion shaft (1) and PTO drive shaft assembly (8).
(1) Pinion Shaft
(2) 19T Gear
(3) 42T Gear
(4) 29T Gear
Differential Gear Assembly
1. Remove the differential bearing case (1) mounting screws.
2. Remove the differential bearing case (1), noting the number of
left and right shims.
3. Take out the differential gear assembly (2) from transmission
case.
(When reassembling)
• Use same number of shim as before disassembling.
• Replace the left and right bearing cases on the same sides as
before.
• Apply grease to ball and ball seats.
Tightening torque
(1) Differential Bearing Case
3-S23
TRANSMISSION (MANUAL TYPE)
(5) External Snap Ring
(6) External Snap Ring
(7) External Snap Ring
(8) PTO Drive Shaft Assembly
48.1 to 55.9 N·m
Differential bearing case
4.9 to 5.7 kgf·m
mounting screw
35.5 to 41.2 ft-lbs
(2) Differential Gear Assembly
W1021656
W1042963
KiSC issued 08, 2007 A