Separating Clutch Assembly - Kubota L2800 Workshop Manual

L2800, L3400, WSM

(2) Separating Clutch Assembly

Tractor Manuals Scotland
Separating Engine from Clutch Housing Case
1. Check the engine and clutch housing case are securely mounted
on the disassembling stands.
2. Remove the engine mounting screws, and separate the engine
from the clutch housing case.
(When reassembling)
• Apply grease to the splines.
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
face of the engine and clutch housing case.
Tightening torque
Clutch Assembly
1. Insert the clutch center tool.
2. Remove the clutch assembly together with the clutch center tool.
(When reassembling)
• Direct the shorter end of the clutch disc boss toward the flywheel.
• Apply molybdenum disulphide (Three Bond 1901 or equivalent)
to the splines of clutch disc boss.
• Insert the pressure plate, noting the position of straight pins.
IMPORTANT
• Be sure to align the center of disc and flywheel by inserting
the clutch tool set.
NOTE
• Do not allow grease and oil on the clutch disc facing.
Tightening torque
(A) L3400
Tractor Manuals Scotland - Please Do Not Copy
2-S10
48.1 to55.8 N·m
Engine mounting screws to
4.9 to5.7 kgf·m
clutch housing
35.4 to41.2 ft-lbs
23.5 to 27.5 N·m
Clutch cover mounting
2.4 to 2.8 kgf·m
screws and reamer screws
17.5 to 20.3 ft-lbs
(B) L2800
CLUTCH
W1017559
W1017686
KiSC issued 08, 2007 A