Kubota L2800 Workshop Manual page 184

L2800, L3400, WSM
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
Three Point Linkage
1. Remove the top link (1).
2. Remove the lift rod (2).
3. Remove the lower link (3).
(1) Top Link
(2) Lift Rod
ROPS
1. Remove the ROPS upper frame (1).
2. Remove the ROPS lower frame (2).
(When reassembling)
Tightening torque
(1) ROPS Upper Frame
(2) ROPS Lower Frame
Outer Components
1. Place the disassembling stands under the transmission case.
2. Remove the seat (1).
3. Remove the grip (2), (4), (7).
4. Remove the auxiliary change lever guide (3) and position control
lever guide (6).
5. Remove the center cover (5).
6. Remove the rear wheels (10).
7. Disconnect the wirings (11) from the rear fender.
8. Remove the rear fenders (8) and fender rear stay (9).
9. Remove the housing cover (12) and both side steps (13).
(When reassembling)
Tightening torque
(1) Seat
(2) Grip
(3) Auxiliary Change Lever Guide
(4) Grip
(5) Center Cover
(6) Position Control Lever Guide
(7) Grip
3-S11
TRANSMISSION (MANUAL TYPE)
(3) Lower Link
167 to 196 N·m
ROPS mounting screw 17.0 to 20.0 kgf·m
123 to 144 ft-lbs
118 to 137 N·m
ROPS fulcrum screw 12 to 14 kgf·m
87 to 101 ft-lbs
(3) ROPS Fulcrum Screw
197 to 226 N·m
Rear wheel mounting
20 to 23 kgf·m
screw and nut
145 to 166 ft-lbs
(8) Rear Fender
(9) Fender Stay
(10) Rear Wheel
(11) Wiring
(12) Housing Cover
(13) Step
W1014601
W1029286
W1014739
KiSC issued 08, 2007 A