Safety Switch - Kubota L2800 Workshop Manual

L2800, L3400, WSM

(3) Safety Switch

Tractor Manuals Scotland
Main Switch Key at PREHEAT Position
1. Turn and hold the main switch key at the PREHEAT position.
2. Measure the resistance with an ohmmeter across the B terminal
and the G terminal, and across the B terminal and the AC
terminal.
3. If 0 ohm is not indicated, these contacts of the main switch are
faulty.
Resistance
Safety Switch Continuity (Manual Transmission Type)
1. Remove the safety switch leads.
2. Connect the circuit tester to the safety switch leads.
3. Measure the resistance between leads.
4. If the safety switch is defective, replace it.
Resistance (Across
switch terminal)
(1) Safety Switch for PTO Gear Shift
Lever
Tractor Manuals Scotland - Please Do Not Copy
9-S10
ELECTRICAL SYSTEM
0 Ω
B terminal – G terminal
0 Ω
B terminal – AC terminal
When switch is
0 Ω
pushed
When switch is
Infinity
released
(2) Safety Switch for Range Gear Shift
Lever
W1029974
W1015515
KiSC issued 08, 2007 A