Table of Contents
Advertisement
82410· 82710· 82910 WSM, 12271
3 TRANSMISSION
Clutch Shaft and Others
1. Pull out the clutch shaft assembly (1).
2. Pull out the 2nd gear shaft, front assembly (2).
3. Pull out the 3rd shaft, front assembly (3).
(When reassembling)
• Apply small amount of the grease to the oil seal (4).
12490F30210
(1) Clutch Shaft Assembly
(2) 2nd Gear Shaft, Front Assembly
(3) 3rd Shaft, Front Assembly
(4) Oil Seal
12010830160
[3] SEPARATING CENTER FRAME AND TRANSMISSION CASE
Draining Transmission Fluid
1. See page 3-S12.
12271830050
Battery Connector
1. Open the hood (1) and remove the front grille (3).
2. Disconnect the battery grounding cord (4) .
•
NOTE
• When disconnecting the battery cords, disconnect the
grounding cord first. When connecting, the positive cord
first.
12270830130
Roll-Over Protective Structures (RaPS) and 3 Point Hitch
1. Disconnect the wire harness of tail lamps.
2. Remove the ROPS frame top (3).
3. Remove the lower link (1) and the collar from the 3-point hitch
shaft (2).
4. Remove the both sides reflectors (6) with frame.
5. Remove the both sides fender mounting screws.
6. Remove the PTO shaft cover (5) and connecting plate.
7. Remove the ROPS left, right frames and 3-point hitch shaft (2).
(When reassembling)
(3) Front Grille
(4) 8attery Cord
(1) Hood
(2) Side Cover
Connecting plate mounting
47.1 to 56.9 N'm
4.8 to 5.8 kgf·m
screw
34.7 to 42.0 ft-Ibs
ROPS frame and frame
149.1 to 179.5 N·m
top mounting bolt and nut
15.2 to 18.3 kgf·m
109.9 to 132.4 ft-Ibs
ROPS frame mounting
77.5 to 90.1 N·m
Tightening torque
7.9 to 9.2 kgf·m
screw
57.2 to 66.5 ft-Ibs
3-Point hitch shaft setting
14.7 to 19.6 N·m
1.5 to 2.0 kgf·m
screw
10.8 to 14.5 ft-Ibs
3-Point hitch shaft setting
43.0 to 47.0 N'm
screw lock nut
4.4 to 4.8 kgf·m
31.7 to 35.4 ft-Ibs
12270P10010
(1) Lower Link
(2) 3-Point Hitch Shaft
(3) ROPS Frame, Top
(4) ROPS Frame
(5) PTO Shaft Cover
(6) Tail Lamp
12270830140
3-S17
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
