M5640SU, M5640DT-SU, WSM
5. PREPARATION
[1] SEPARATING ENGINE FROM CLUTCH HOUSING CASE
Draining Engine Oil
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. Remove the drain plugs (1) to drain oil.
4. Screw in the drain plugs (1).
(When refilling)
• Fill the engine oil up to the upper line on the dipstick (2).
IMPORTANT
• Never mix two different type of oil.
• Use the proper SAE Engine Oil according to ambient
temperatures.
Refer to "5. LUBRICANTS, FUEL AND COOLANT" at
GENERAL Section.
Engine oil capacity
(1) Drain Plug
(2) Dipstick
(3) Oil Inlet Plug
1-S19
ENGINE
7.2 L
7.6 U.S.qts
6.3 Imp.qts
A : Oil level is acceptable within this
range.
9Y1210365ENS0016US0
KiSC issued 07, 2009 A