Separating Engine From Clutch Housing - Kubota B2301 Workshop Manual

B2301, B2601, WSM

(2) Separating Engine from Clutch Housing

Bonnet, Side Cover and Battery Cord
1. Open the bonnet (1).
2. Disconnect the battery negative cord.
3. Disconnect the head light connectors and remove the bonnet
(1) side covers (2).
NOTE
• When disconnecting the battery cords, disconnect the
grounding cord first. When connecting, positive cord first.
(1) Bonnet
(2) Side Cover
Hydraulic Hoses from Power Steering Cylinder
1. Disconnect the hydraulic hoses (1), (3) from the power steering
cylinder (2).
(1) Hydraulic Hose (R.H.)
(2) Power Steering Cylinder
Fuel
1. Disconnect the fuel hose (1) from the fuel filter (2).
2. Drain the fuel to the fuel tank completely.
(1) Fuel Hose (from Fuel Tank)
Wiring Harness, Hour Meter Cable and Clamp (Left Side)
1. Disconnect the wiring harness (1) from battery, dynamo, engine
and starter.
2. Remove the clamp (2).
3. Loosen the dynamo mounting bolts and remove the hour meter
cable (3).
(1) Wiring Harness
(2) Clamp
1-S23
ENGINE
(3) Battery
9Y1211156ENS0025US0
(3) Hydraulic Hose (L.H.)
9Y1211156ENS0026US0
(2) Fuel Filter
9Y1211156ENS0027US0
(3) Hour Meter Cable
9Y1211156ENS0028US0
KiSC issued 11, 2014 A