Avaya WLAN 8100 Series Reference page 98

ACLI reference for Wireless LAN (WLAN) 8100
6. Configure the LED-State to normal, to turn on the LEDs.
7. Perform a configuration synchronization to apply changes to the AP.
8. Verify that the LED-State on the AP is set to Normal(on).
98 Avaya WLAN 8100 CLI Reference
Software Version
Serial Number
Location
Country Code
Band Plan
Locale
Age (since last update)
System Up Time
Discovery Reason
Managing Controller
WC System IP Address
WC Managed Time
Profile Id
Profile Name
Configuration Apply Status
Authenticated Clients
Configuration Failure Error
Reset status
Code Download Status
Image Upgrade Needed
Ap Techdump Status
Hardware Version
AP port speed and duplex mode
AP LED Status
--------------------------------------------------------------
WC8180(config-domain-ap)#led-state normal
WC8180(config-domain-ap)#end
WC8180#wireless controller config-sync
WC8180#show wireless domain ap database 58:16:26:AC:75:60 detail
Sample Output:
-------------------------------------------------------
AP MAC
Label
Model
Country Code
Serial Number
Profile ID
Preferred Controller : 192.168.11.3
Alternate Controller : 0.0.0.0
LED-State
Location
Campus
Building
Floor
Sector
Radio 1
Channel
Power
External Antenna
Extension Cable
Assoc-zone
Roam-zone
Admin-Enable
Radio 2
Channel
Power
External Antenna
Comments? infodev@avaya.com
: 2.1.0.088
: 11JX192F001P
:
: VE
: APL1
: VE/0
: 0d:00:00:01
: 0d:19:14:07
: Controller IP via DHCP
: Local Controller
: 192.168.11.4
: 0d:01:01:09
: 13
: VE
: Success
: 0
:
: Not Started
: Not Started
: No
: Not Started
: R01
: FullDuplex1000
: LED-OFF
: 58:16:26:AC:75:60
:
: AP8120-E
: VE
: 11JX192F001P
: 13
: Normal(On)
:
:
:
:
: 36
: 60
: WL81AT070E6
: 3-ft
: Auto
: Auto
: True
: 11
: 60
: WL81AT070E6
August 2013