Avaya WLAN 8100 Series Reference page 261

Procedure
To display MLT properties, use the following command from Global Configuration
mode.
show mlt spanning-tree <1-32>
Configuring STP participation for MLTs
About this task
Use the following procedure to set Spanning Tree Protocol (STP) participation for Multi-Link
trunks (MLT).
Procedure
To configure STP participation for MLTs, use the following command from Global
Configuration mode.
mlt spanning-tree <1-32> [stp <1-8>, ALL>] [learning {disable |
normal | fast}]
<1-32>
stp <1-8>
learning {disable | normal | fast}
Configuring LACP and VLACP using the CLI
Related topics:
Configuring Link Aggregation using CLI
Configuring VLACP using CLI
Configuring Link Aggregation using CLI
The following sections describe the commands necessary to configure and manage Link
Aggregation using the CLI.
Avaya WLAN 8100 CLI Reference
Variable Definitions
Variable
on page 267
ACLI reference for wired networks
Value
Specifies the ID of the MLT to associate with
the STG.
Specifies the spanning tree group.
Specifies the STP learning mode:
• disable -- disables learning
• normal -- sets the learning mode to normal
• fast -- sets the learning mode to fast
on page 261
August 2013 261