Mac-Security Auto-Learning Port Command; No Mac-Security Auto-Learning Command; Default Mac-Security Auto-Learning Command - Avaya WLAN 8100 Series Reference

ACLI Reference for wired networks
The mac-security auto-learning port command configures MAC security auto-
learning on the ports.
The syntax for the command is
mac-security auto-learning port <portlist> disabledisable|{enable
[max-addrs <1-25>}
The following table outlines the parameters for this command.
Table 47: mac-security auto-learning parameters
<portlist>
disable|enable
max-addrs <1-25>
The mac-security auto-learning command executes in the Interface Configuration
mode.
This command disables MAC security auto-learning for the specified ports on the switch. The
syntax for this command is
no mac-security auto-learning port <portlist>
The no mac-security auto-learning command executes in the Interface Configuration
mode.
The default mac-security auto-learning command sets the default MAC security
auto-learning on the switch.
The syntax for the command is
default mac-security auto-learning port <portlist> [enable] [max-
addrs]
The following table outlines the parameters for this command.
Table 48: default mac-security auto-learning parameters
<portlist>
202 Avaya WLAN 8100 CLI Reference

mac-security auto-learning port command

Parameter
The ports to configure for auto-learning.
Disables or enables auto-learning on the specified ports.
The default is disabled.
Sets the maximum number of addresses the port learns.
The default is 2.

no mac-security auto-learning command

default mac-security auto-learning command

Parameters
Comments? infodev@avaya.com
Description
Description
The ports to configure for auto-learning.
August 2013