Avaya WLAN 8100 Series Reference page 291

Related topics:
IGMP snooping configuration procedures
Configuring IGMP snooping on a VLAN
Configuring IGMP send query on a VLAN
Configuring IGMP proxy on a VLAN
Configuring the IGMP version on a VLAN
Configuring static mrouter ports on a VLAN
Displaying IGMP snoop, proxy, and mrouter configuration
Configuring IGMP parameters on a VLAN
Configuring the router alert option on a VLAN
Displaying IGMP interface information
Job aid on page 297
Displaying IGMP group membership information
Configuring unknown multicast packet filter
Displaying the status of unknown multicast packet filtering
Job aid on page 301
Specifying a multicast MAC address to be allowed to flood all VLANs
Displaying the multicast MAC addresses for which flooding is allowed
Job aid on page 302
Displaying IGMP cache information
Job aid on page 302
Flushing the router table
Configuring IGMP selective channel block
Configuring IGMP selective channel block navigation
Creating an IGMP profile
Deleting an IGMP profile
Applying the IGMP filter profile on interface
Removing a profile from an interface
Displaying an IGMP profile
IGMP snooping configuration procedures
Procedure
To configure IGMP snooping, the only required configuration is to enable snooping on
the VLAN.
All related configurations, listed below, are optional and can be configured to suit the
requirements of your network.
Avaya WLAN 8100 CLI Reference
on page 291
on page 292
on page 292
on page 293
on page 293
on page 294
on page 295
on page 296
on page 297
on page 300
on page 302
on page 303
on page 303
on page 304
on page 304
on page 304
on page 304
on page 305
ACLI reference for wired networks
on page 294
on page 299
on page 300
on page 301
on page 301
on page 303
August 2013 291