Avaya WLAN 8100 Series Reference page 258

ACLI Reference for wired networks
Configuring RSTP on a port
About this task
Use the following procedure to set the RSTP parameters, which include path cost, edge-port
indicator, learning mode, point-to-point indicator, priority, and protocol migration indicator on
the single or multiple port.
Procedure
To configure RSTP on a port, use the following command from Interface Configuration
mode.
spanning-tree rstp [port <portlist>] [cost <1-200000000> [edge-
port {false | true}] [learning {disable | enable}] [p2p {auto |
force-false | force-true}] [priority {00 | 10 | ... | F0}]
[protocol-migration {false | true}]
Variable Definitions
port <portlist>
cost <1-200000000>
edge-port {false | true}
learning {disable | enable}
p2p {auto | force-false | force-true}
priority {00 | 10 |... | F0}
protocol-migration {false | true}
Displaying RSTP configuration
About this task
Use the following procedure to display the Rapid Spanning Tree Protocol (RSTP) related
bridge-level configuration details.
258 Avaya WLAN 8100 CLI Reference
Variable
Comments? infodev@avaya.com
Value
Filter on list of ports.
Sets the RSTP path cost on the single or
multiple ports; the default is 200000.
Indicates whether the single or multiple ports
are assumed to be edge ports. This
parameter sets the Admin value of edge port
status; the default is false.
Enables or disables RSTP on the single or
multiple ports; the default is enable.
Indicates whether the single or multiple ports
are to be treated as point-to-point links. This
command sets the Admin value of P2P
Status; the default is force-true.
Sets the RSTP port priority on the single or
multiple ports; the default is 80.
Forces the single or multiple port to transmit
RSTP BPDUs when set to true, while
operating in RSTP mode; the default is
false.
August 2013