Avaya WLAN 8100 Series Reference page 315

element-type {ip| l2 |system}
element-id <1-55000>
Removing classifier entries
About this task
Use the following procedure to delete classifier entries.
Note: Each classifier can have only a single IP classifier element plus a single L2 classifier
element or system classifier element. However, a classifier can be created using only one IP
classifier element or only one L2 classifier element or only one system classifier element.
Procedure
Delete classifier entries by using the following command from Global Configuration
mode.
no qos classifier <1-55000>
Combining individual classifiers
About this task
Use the following procedure to combine individual classifiers.
Note: A classifier block that is referenced in an installed policy cannot be deleted.
Procedure
Combine individual classifiers by using the following command from Global
Configuration mode.
qos classifier-block <1-55000> block-number <1-55000> [name
<WORD>]{set-id <1-55000> | set-name <WORD>} [{in-profile-action
<1-55000> | in-profile-action-name <WORD>} | {meter <1-55000> |
meter-name <WORD>}]
Variable Definitions
Variable
classifier-block<1-55000>
block-number <1-55000>
Avaya WLAN 8100 CLI Reference
Variable
Specifies the element type; either ip or l2, or system
classifier.
Specifies the element ID; range is 1–55000.
Specifies an the classifier block ID; range is 1–55000.
Specifies the classifier block number; range is 1–55000.
ACLI reference for wired networks
Value
Value
August 2013 315