Avaya WLAN 8100 Series Reference page 105

5. Use the following command options to configure Ageout.
Avaya WLAN 8100 CLI Reference
Use the following command options to configure security options
WCP8180(config-security)#wids known-ap 00:88:99:66:66:88 security ?
any All security modes -- open, WEP, WPA/WPA2
open Open security
wep WEP mode
wpa WPA/WPA2 mode
Use the following command to configure an SSID.
Note:
When you configure an SSID for a network profile, ensure that it is unique across
the network. SSIDs can have a maximum of 32 characters.
Also, ensure that you do not configure SSIDs that have similar characters but are
different only in their case. For example do not configure SSIDs avaya-demo and
AVAYA-DEMO within the same network.
WCP8180(config-security)#wids known-ap 00:88:99:66:66:88 ssid ?
WORD an alphanumeric string, 1-32 chars
Use the following command options to configure the Known AP type.
WCP8180(config-security)#wids known-ap 00:88:99:66:66:88 type ?
known-foreign
local-enterprise
other
Use the following command options to configure the WDS mode for a known AP.
WCP8180(config-security)#wids known-ap 00:88:99:66:66:88 wds-mode ?
any Operation as a bridge or in normal mode
bridge Operation as a bridge only
normal Operation in normal mode only
Use the following command options to configure the Wired mode for a known AP.
WCP8180(config-security)#wids known-ap 00:88:99:66:66:88 wired-mode ?
allowed AP is allowed to be on the wired network
not-allowed AP is not allowed on the wired network
WCP8180(config-security)#wids ageout ?
adhoc-clients
ap-failure
detected-clients
rf-scan
Use one of the following commands to configure individual Ageout times.
ACLI reference for the Wireless LAN (WLAN) 8100
The AP is known from outside
The AP is in local database
Others...
Configure ageout for ad hoc network status
Configure ageout for AP failure status
Configure ageout for detected clients status
Configure ageout for RF scan status
August 2013 105