Avaya WLAN 8100 Series Reference page 52

ACLI reference for Wireless LAN (WLAN) 8100
Configuring RADIUS accounting
The RADIUS accounting helps the administrator to track the network usage for auditing and
billing purposes.
When you configure RADIUS accounting, at the start of service delivery an Accounting Start
packet is generated describing the type of service being delivered and the user it is delivered
to. This packet is sent to the RADIUS accounting server, which sends back an acknowledgment
that the packet is received. At the end of the service delivery, the client generates an
Accounting Stop packet describing the type of service that was delivered and statistics
(optional), such as elapsed time, input and output octets, or input and output packets. It then
sends that data to the RADIUS accounting server, which sends back an acknowledgment that
the packet is received.
About this task
Use the procedure to configure RADIUS accounting in a RADIUS profile.
Procedure
1. Enter the Wireless Configuration mode of the CLI.
2. Configure RADIUS accounting on a RADIUS profile:
3. Enable RADIUS accounting in the network profile and also map the RADIUS
52 Avaya WLAN 8100 CLI Reference
WC8180#radius profile <profile name> type ?
acct
auth
wc8180#radius server <radius accounting server ip> <radius accounting
profile name> type acct ?
encrypted-secret
health-check-encrypted-password
health-check-interval
health-check-password
health-check-user
priority
secret
udp-port
<cr>
Note:
Server selection is optional for configuring RADIUS accounting. Also, health-
check does not apply to accounting servers.
accounting profile with the network profile.
WC8180(config-network-profile)#radius accounting?
accounting
accounting-profile
WC8180(config-network-profile)#radius accounting
WC8180(config-network-profile)#radius accounting-profile <radius
accounting profile name>
Comments? infodev@avaya.com
encrypted radius secret
Radius health check password (encrypted)
Radius health check interval
User password for radius health check
User name used for radius healtcheck
server priority
server shared secret
server UDP port
August 2013