Avaya WLAN 8100 Series Reference page 192

ACLI Reference for wired networks
3. Click Enter.
Configuring RADIUS
Configure RADIUS to perform authentication services for system users. For specific
configuration procedures, see the vendor documentation. In particular, ensure that you set the
appropriate Service-Type attribute in the user accounts as follows:
• for read-write access, Service-Type = Administrative
• for read-only access, Service-Type = NAS-Prompt
192 Avaya WLAN 8100 CLI Reference
Parameter
{none | local | radius | tacacs}
Comments? infodev@avaya.com
Description
enabling or disabling passwords for
one enables or disables it for the
other.
This parameter specifies if the
password is to be disabled (none), or if
the password to be used is the locally
stored password created in the
previous procedure, or if RADIUS
authentication or TACACS +AAA
services is used.
Use the following commands to create
a primary RADIUS server and shared
secret:
• radius-server host <IP
address>
• radius-server key
<shared secret>
• Verify using the show radius-
server command.
Use the following commands to create
a primary TACACS server and shared
secret:
tacacs-server host <IP
•
address>
• tacacs-server key
<shared secret>
• Verify using show tacacs-
server command.
August 2013