Avaya WLAN 8100 Series Reference page 366

ACLI Reference for wired networks
Configuring the system log
Setting the system log to default
Clearing the system log
About this task
Use this procedure to displays the configuration, and the current contents, of the system event
log.
Procedure
Enter the show logging [config] [critical] [serious]
[informational] [sort-reverse] command Privileged Executive mode.
CLI reference:
WCP8180(config)#show logging ?
Show logging information
system
wireless-controller
WCP8180(config)#show logging system ?
config
critical
informational
serious
<cr>
WCP8180(config)#show logging wireless-controller ?
volatile
WCP8180(config)#show logging wireless-controller volatile ?
critical
informational
serious
<cr>
Variable Definitions
config
critical
serious
informational
sort-reverse
About this task
Use this procedure to configure the system settings for the system event log.
366 Avaya WLAN 8100 CLI Reference
on page 366
on page 367
Displaying the system log
Display configuration of event logging
Critical event
Informational message
Serious event message
Display log messages in DRAM
Critical event messages
Informational messages
Serious event messages
Variable
Configuring the system log
Comments? infodev@avaya.com
on page 367
Show the contents of logging buffers
Show logging information of wireless controller
Display configuration of event logging.
Display critical log messages.
Display serious log messages.
Display informational log messages.
Display informational log messages in reverse
chronological order (beginning with most recent).
Value
August 2013