Avaya WLAN 8100 Series Reference page 224

ACLI Reference for wired networks
The commands erase settings for the TACACS+ primary and secondary servers and secret
key, and restore default port settings.
Enabling remote TACACS+ services
About this task
To enable TACACS+ to provide services to remote users over serial or Telnet connections,
use the following commands in Global or Interface Configuration mode.
For serial connections:
cli password serial tacacs
For Telnet connections:
cli password telnet tacacs
You must configure a TACACS+ server on the switch before you can enable remote TACACS
+ services. For more information about configuring the primary TACACS+ server and shared
secret, see "Configuring TACACS+ server settings" (page 159).
Enabling TACACS+ authorization
About this task
To enable TACACS+ authorization globally on the switch, use the following command in Global
or Interface Configuration mode:
tacacs authorization enable
To disable TACACS+ authorization globally on the switch, use the following command in
Global or Interface Configuration mode:
tacacs authorization disable
The default is disabled.
Setting authorization privilege levels
The preconfigured privilege levels control which commands can be executed. If a user has
been assigned a privilege level for which authorization has been enabled, TACACS+
authorizes the authenticated user to execute a specific command only if the command is
allowed for that privilege level.
To specify the privilege levels to which authorization applies, use the following command in
Global or Interface Configuration mode:
tacacs authorization level all|<level>|none
The following table describes the parameters for this command.
Table 68: tacas authorization command parameters
all
224 Avaya WLAN 8100 CLI Reference
Parameter
Comments? infodev@avaya.com
Description
Authorization is enabled for all privilege levels.
August 2013