Related topics:
Configuring VLANs using CLI
Configuring STP using CLI
Configuring MLT using CLI
Configuring LACP and VLACP using the CLI
Configuring VLANs using CLI
About this task
Use the CLI commands described in this section to create and manage VLANs. Depending on
the type of VLAN being created or managed, the command mode needed to execute these
commands can differ.
Related topics:
Displaying VLAN information
Variable definitions
Displaying VLAN interface information
Displaying VLAN port membership
Setting the management VLAN
Resetting the management VLAN to default
Creating a VLAN
Variable definitions
Deleting a VLAN
Modifying VLAN MAC address flooding
Configuring VLAN name
Enabling automatic PVID
Configuring VLAN port settings
Configuring VLAN members
Configuring VLAN Configuration Control
Managing the MAC address forwarding database table
IP Directed Broadcasting
Displaying VLAN information
About this task
Use the following procedure to display the number, name, type, protocol, user PID, state of a
VLAN and whether it is a management VLAN.
Procedure
To display VLAN information, use the command show vlan in the Privileged EXEC
mode.
CLI reference:
WCP8180#show vlan ?
configcontrol
Avaya WLAN 8100 CLI Reference
on page 237
on page 248
on page 259
on page 237
on page 238
on page 239
on page 239
on page 239
on page 240
on page 240
on page 241
on page 241
on page 241
on page 242
on page 243
on page 247
Display VLAN control mode
ACLI reference for wired networks
on page 261
on page 239
on page 241
on page 243
on page 244
August 2013
237