Avaya WLAN 8100 Series Reference page 360

ACLI Reference for wired networks
2. Use the ip ipfix flush port <port_list> [export-and-flush]
port-list
export-and-flush
Viewing the IPFIX table
About this task
Use the following procedure to display IPFIX data collected from the switch.
Procedure
1. Enter Privileged Executive mode.
2. Use the show ip ipfix table <unit_number> sort-by <sort_by>
Variable
<unit_number>
<sort_by>
360 Avaya WLAN 8100 CLI Reference
command to delete the collected IPFIX information for the port or ports.
Variable Definitions
Variable
sort-order <sort_order> display <num_entries> command view the
IPFIX data.
Variable Definitions
The unit number of the collector. Currently up to two collectors are
supported so the values 1 or 2 are valid.
The value on which the data is sorted. Valid options are:
• byte-count
• dest-addr
• first-pkt-time
• last-pkt-time
• pkt-count
• port
• protocol
• source-addr
• TCP-UDP-dest-port
• TCP-UDP-src-port
• TOS
Comments? infodev@avaya.com
Definition
Single or comma-separated list of ports.
Export data to a collector before it is
deleted.
Definition
August 2013