Avaya WLAN 8100 Series Reference page 180

ACLI Reference for wired networks
Table 31: shutdown command parameter
force
minutes-to-wait <1-60>
cancel
reload command
About this task
The reload command operates in a similar fashion to the shutdown command. However, the
reload command is intended more to be used by system administrators using the command
functionality to configure remote devices and reset them when the configuration is complete.
The reload command differs from the shutdown command in that the configuration is not
explicitly saved after the command is issued. This means that any configuration changes must
be explicitly saved before the switch reloads.
The reload command does temporarily disable auto-save functionality until the reload occurs.
Cancelling the reload returns auto-save functionality to any previous setting.
The reload command has the following syntax: reload [force] [minutes-to-wait
<1-60>] [cancel]
The following table describes the parameters of the reload command.
Table 32: reload command parameters
force
minutes-to-wait <1-60>
cancel
180 Avaya WLAN 8100 CLI Reference
Parameters
Parameter
Comments? infodev@avaya.com
Description
This parameter forces the shutdown without
confirmation.
This parameter represents the number of minutes to
wait before the shutdown occurs. If no value is
specified, the default value of 10 minutes is used.
This parameter cancels a scheduled shutdown any
time during the time period specified by the
minutes-to-wait
Description
This parameter forces the reload without confirmation.
This parameter represents the number of minutes to
wait before the reload occurs. If no value is specified,
the default value of 10 minutes is used.
This parameter cancels a scheduled reload any time
during the time period specified by the minutes-to-wait
parameter.
parameter.
August 2013