Avaya WLAN 8100 Series Reference page 89

Avaya WLAN 8100 CLI Reference
no
preferred-controller
profile-id
radio
Configure an alternate controller.
WC8180(config-domain-ap)# alternate-controller ?
A.B.C.D Controller IP Address
Configure the AP label.
WC8180(config-domain-ap)# label ?
WORD AP Label (1-32 characters)
Configure the LED state on the AP.
WC8180(config-domain-ap)# led-state ?
off Turn-off all LEDs on the AP
normal Set original operation mode (enable)
Configure the location of the AP.
WC8180(config-domain-ap)#location ?
WORD Enter campus string (limit: 1-8 chars)
Configure the AP model.
WC8180(config-domain-ap)#model ?
ap8120 Avaya AP8120
ap8120-E Avaya AP8120-E (with external antennas)
Configure the preferred controller IP address.
WC8180(config-domain-ap)#preferred-controller ?
A.B.C.D Controller IP Address
Configure an AP profile.
WC8180(config-domain-ap)#profile-id ?
<1-32> AP Profile ID
Configure the domain AP radio.
Select the radio interface.
WC8180(config-domain-ap)#radio ?
<1-2> Radio Interface
Configure the following parameters on the selected radio interface.
WC8180(config-domain-ap)#radio 1 ?
admin-enable Configure the radio admin mode enable
antenna Select antenna type for the specified radio
assoc-zone Configure association RSSI threshold
channel Configure channel setting for the specified radio
ext-cable Select extension cable type for the specified radio
power Configure power setting for the specified radio
roam-zone Configure dissociation RSSI threshold
ACLI reference for the Wireless LAN (WLAN) 8100
Delete Domain AP configurations
Configure preferred wireless controller
Assign AP Profile ID used for AP configuration
Configure radio channel / power / antenna / cable
settings
August 2013 89