Avaya WLAN 8100 Series Reference page 150

ACLI Reference for wired networks
dhcp client lease
default-gateway
address
address source
Displaying interfaces
The status of all interfaces on the switch can be viewed, including Multi-Link Trunk
membership, link status, autonegotiation and speed using the following command.
The show interfaces command displays the current configuration and status of all
interfaces.
The syntax for the show interfaces command is: show interfaces [names]
[<portlist>]
CLI reference:
WCP8180(config-security)#show interfaces ?
gbic-info
LINE
names
verbose
<cr>
150 Avaya WLAN 8100 CLI Reference
Parameters
show interfaces command
Display gbic details
List of ports
Display interface names
Display contains informations about STP, VLACP, EAP and AES
Comments? infodev@avaya.com
Description
• BootP Always
• Disabled
• BootP or Last Address
• BootP When Needed
• DHCP Always
• DHCP or Last Address
• DHCP When Needed
Displays DHCP client lease information. The
command displays information about configured lease
time and lease time granted by the DHCP server.
Displays the IP address of the default gateway.
Displays the current IP address.
Displays the BootP or DHCP client
information.Assigning and clearing IP addresses for
specific units
• DHCP always
• DHCP when needed
• DHCP or last address
• Disabled
• BootP always
• BootP when needed
• BootP or last address
August 2013