Avaya WLAN 8100 Series Reference page 39

4. If there are other controllers (for example, peers) in the domain, ensure that you run
5. Run the wireless captive-portal tftp-get command to upload
6. Verify the status of the upload in the Captive Portal locale by running the show
Avaya WLAN 8100 CLI Reference
Important:
To enable the AMDC to upload the .zip file from the TFTP server, ensure that the
controller is configured with the TFTP server IP address and the package
filename (.zip) is specified when configuring the captive-portal locale.
the config-sync command to push the AMDC configuration to all controllers in the
domain. Verify that all controllers are synchronized.
the .zip file to the controller. This is one time action command.
If you run the action command without any parameters, all controllers in the domain
upload all the customization files (including customization package and
customization image files for account, brand, background and logout). If the
controllers have multiple locales, this command examines the current configuration
and if the new configuration is different, it forces an upload.
You can also specify the following parameters in the action command:
• Peer controller IP address
• Profile Id and locale Id
• File type (account, brand logo, background, logout background and package
file)
• Action flag
After the customization package file is uploaded to your controller, it is not removed
in the flash unless you run the default command or perform another upload. You
can also use the default command to reset the configuration and to remove the
corresponding file.
wireless captive-portal locale command. The status can be one of the
following:
• None — the upload was not started
• Success — the upload was successful
• In Progress — the upload is in progress
• Transfer Failure — the upload failed because of network connectivity issues.
• Verification Failure — the upload failed because of an incorrect .zip file or the
file is missing one of mandatory html files
• File Not Found — there is no matching file in the TFTP server
• Internal Error — the file size is too big or the flash file system is full
• File Max Size Exceeded — the TFTP file exceeds the file size limit (For image,
1Mb. For package, 4Mb)
ACLI reference for the Wireless LAN (WLAN) 8100
August 2013 39