Avaya WLAN 8100 Series Reference page 76

Cli reference
Hide thumbs Also See for WLAN 8100 Series:
Table of Contents

Advertisement

ACLI reference for Wireless LAN (WLAN) 8100
3. Verify that Station Isolation is enabled on the network profile.
4. (Optional) Configure a static Gateway MAC address.
5. Verify network profile configuration in detail.
6. View the wireless client status in detail, specifically the Gateway IP address and the
76
Avaya WLAN 8100 CLI Reference
WC8180(config-network-profile)#station-isolation enable
WC8180(config-network-profile)#
Sample Output:
WC8180#show wireless network-profile 2
-------------------------------------------------------------
Id
Profile
Mobility
Name
VLAN
--- ------- --------------
2 NP2
default-MVLAN
--------------------------------------------------------------
Note:
The Gateway MAC Address can either be dynamically learnt through DHCP/ARP
or can be configured on the network profile. The dynamic learning is dependent
on client behavior. It is however recommended to configure a static MAC address
if a static Gateway is used in the network.
When you enable Station Isolation, only packets directed to the Gateway MAC
are allowed. All other packets are dropped. Station Isolation allows ARP, DHCP,
DNS packets, packets addressed to the client VAP MAC address and Multicast
packets.
WC8180(config-wireless)#network-profile 2
Entering network-profile (id = 2) configuration mode..
WC8180(config-network-profile)# gateway-mac 00:19:69:91:00:43
Sample Output:
WC8180#show wireless network-profile 2 detail
Network Profile ID: 2
Name
SSID
........
Station Isolation Mode
Gateway MAC address
Gateway MAC address.
WC8180#show wireless client status
Total number of clients: 1
-------------------------------------------------------------------------
------
Client
Client
MAC Address
IP Address
----------------- --------------- ----------------- ---------------
-----------
00:05:02:01:00:01 10.1.21.180
View the client status in detail.
WC8180#sh wireless client status detail
Total number of clients: 1
Client (MAC=00:05:02:01:00:01)
Client IP Address
Comments? infodev@avaya.com
Security
Captive
Mode
Portal
--------- --------- -------------
open
Disabled
: NP2
: Corportate-Network
: Enabled
: 00:19:69:91:00:43
Associated
AP MAC
00:1B:4F:6C:01:00 default-MVLAN
: 10.1.21.180
Station
Isolation
Enabled
Mobility
Status
VLAN
August 2013
Auth

Advertisement

Table of Contents
loading

Table of Contents