Avaya WLAN 8100 Series Reference page 281

Job aid on page 283
Configuring DHCP relay status and parameters on a VLAN
Displaying the DHCP relay configuration for a VLAN
Displaying DHCP relay counters
Job aid on page 285
Clearing DHCP relay counters for a VLAN
DHCP relay configuration procedures
About this task
To configure DHCP relay, perform the following steps:
Procedure
1. Ensure that DHCP relay is enabled globally. (DHCP relay is enabled by default.)
2. Configure the DHCP relay forwarding path, specifying the VLAN IP as the DHCP
3. Enable DHCP for the specific VLAN.
Configuring global DHCP relay status
About this task
Use this procedure to configure the global DHCP relay status. DHCP relay is enabled by
default.
Procedure
To configure the global DHCP relay status, enter the following from the Global
Configuration mode:
[no] ip dhcp-relay
[no]
Displaying the global DHCP relay status
About this task
Use this procedure to display the current DHCP relay status for the switch.
Procedure
To display the global DHCP relay status, enter the following from the User EXEC
command mode:
Avaya WLAN 8100 CLI Reference
relay agent and the remote DHCP server as the destination.
Variable Definitions
Variable
on page 284
on page 285
on page 285
Value
Disables DHCP relay.
ACLI reference for wired networks
on page 283
August 2013 281