Aeroscout - Avaya WLAN 8100 Series Reference

AeroScout

The AeroScout Enterprise Visibility Solution leverages standard wireless networks
infrastructure to accurately locate any asset and utilize that location to deliver direct benefits
such as asset tracking, process automation, theft prevention and increased utilization.
AeroScout Tags which are small, battery-powered devices are mounted on equipment or
carried by personnel to deliver real-time location of the tracked asset or person. The messages
transmitted by the AeroScout Tags are received by access points and are passed along with
additional information (e.g. signal strength measurements) to the AeroScout Engine, a core
component of the AeroScout visibility system, that calculates the accurate location of the
Tag .
The WLAN 8100 solution supports AeroScout enablement on an AP profile.
Important:
AeroScout enablement is supported only on indoor APs. It is not supported on the AP 8120–
O, which is an outdoor AP.
The following sections describe AeroScout enablement using the Avaya CLI.
ACLI reference:
WC8180(config-wireless)#ap-profile ?
<1-32>
WC8180(config-wireless)#ap-profile 2
Entering ap-profile (id = 2) configuration mode...
WC8180(config-ap-profile)#?
AP Profile Configuration Commands
aeroscout
ap-model
cos2dscp
default
default-profile
dscp2cos
end
exit
network
no
profile-name
radio
WC8180(config-ap-profile)#aeroscout ?
enable
Related topics:
Enabling AeroScout on an AP profile
Avaya WLAN 8100 CLI Reference
AP Profile ID
Configure AE protocol support mode
Configure AP Model
CoS to DSCP Mappings
Set a command to its default values
Set current profile, as the default profile for an AP
DSCP to CoS QoS Mapping
End configure mode
Exit from AP profile configuration mode
Configure Network Profile mapping on a radio
Disable AP profile parameters
Set an AP profile name
Configure Radio Profile mapping on a radio
Enable AE protocol support mode
ACLI reference for the Wireless LAN (WLAN) 8100
on page 74
August 2013 73