Avaya WLAN 8100 Series Reference page 117

3. Associate the network profile with the RADIUS authentication profile.
4. Verify network profile configuration.
Related topics:
Configuring the known-client-ageout for MAC validation against a RADIUS server
page 117
Configuring a trap for authentication failure
Configuring the known-client-ageout for MAC validation against a RADIUS server
When the MAC address of a wireless client is not configured on the validating RADIUS server,
MAC validation for that device against the validating RADIUS server fails and the wireless
Avaya WLAN 8100 CLI Reference
Probe Response
Captive Portal Mode
User Validation
Captive Portal Profile Id
Local User Group
RADIUS Authentication Profile Name
RADIUS Accounting Profile Name
RADIUS Accounting Mode
Security Mode
MAC Validation
MAC Validation mode
Wireless ARP Suppression
Radius offload
Station Isolation Mode
Gateway MAC address
(Optional) If the MAC validation mode is not set to radius, use these commands
to set the MAC validation mode to radius.
a. Update the MAC validation mode on the network profile.
WCP8180(config-wireless)#network-profile 2
Entering network-profile (id = 2) ...
WCP8180(config-network-profile)#mac-validation mode radius
b. Verify the MAC validation mode using the following command:
WC8180(config-wireless)#show wireless network-profile detail
CLI reference:
WC8180(config-network-profile)#radius ?
accounting
accounting-profile
authentication-profile
offload
WC8180(config-network-profile)#radius authentication-profile rad-srvr-
profile
WC8180(config-wireless)#show wireless network-profile 2 detail
Network Profile ID: 2
Name
SSID
.......
RADIUS Authentication Profile Name
.......
Security Mode
MAC Validation
MAC Validation mode
.......
ACLI reference for the Wireless LAN (WLAN) 8100
: Enabled
: Disabled
: open
: 0
: Default
:
:
: Disabled
: open
: Enabled
: radius
: Disabled
: Disabled
: Disabled
: 00:00:00:00:00:00
Enable RADIUS accouting function
Configure accounting radius profile
Configure authentication RADIUS profile
Enable radius offloading
: Default
: Guest-Network
: rad-srvr-profile
: open
: Enabled
: radius
on page 118
on
August 2013 117