Avaya WLAN 8100 Series Reference page 165

The syntax for this command is: clock source {sntp | rtc | sysUpTime}
Substitute {sntp | rtc | sysUpTime} with the clock source selection.
This command is executed in the Global Configuration command mode.
default clock source command
This command sets the clock source to factory defaults. The syntax of this command is:
default clock source
This command is executed in the Global Configuration command mode.
Custom Autonegotiation Advertisements
Custom Autonegotiation Advertisement (CANA) customizes the capabilities that are
advertised. It also controls the capabilities that are advertised by the WC 8180 as part of the
auto-negotiation process.
Use the following CLI commands to configure CANA.
Related topics:
Configuring CANA
Viewing current autonegotiation advertisements
Setting default auto-negotiation-advertisements
no auto-negotiation-advertisements command
Configuring CANA
About this task
Use the auto-negotiation-advertisements command to configure CANA.
To configure port 5 to advertise the operational mode of 10 Mb/s and full duplex enter the
following command line: auto-negotiation-advertisements port 5 10-full
Viewing current autonegotiation advertisements
About this task
To view the autonegotiation advertisements for the device, enter the following command: show
auto-negotiation-advertisements [port <portlist>]
Setting default auto-negotiation-advertisements
The default auto-negotiation-advertisements command makes a port advertise
all its auto-negotiation-capabilities.
The syntax for the default auto-negotiation-advertisements command is:
default auto-negotiation-advertisements [port <portlist>]
Avaya WLAN 8100 CLI Reference
on page 165
ACLI reference for wired networks
on page 165
on page 165
on page 166
August 2013 165