Avaya WLAN 8100 Series Reference page 197

security-lists
The show mac-security command is executed in the Privileged EXEC command mode.
show mac-security mac-da-filter command
The show mac-security mac-da-filter command displays configuration information
for filtering MAC destination addresses (DA). Packets can be filtered from up to 10 MAC
DAs.
The syntax for the show mac-security mac-da-filter command is
show mac-security mac-da-filter
The show mac-security mac-da-filter command is executed in the Privileged EXEC
command mode.
The show mac-security mac-da-filter command has no parameters or variables.
mac-security command
The mac-security command modifies the MAC security configuration.
The mac-security command is executed in the Global Configuration mode.
CLI reference:
WCP8180(config)#mac-security ?
auto-learning
disable
enable
filtering
intrusion-detect
intrusion-timer
learning
learning-ports
mac-address-table
mac-da-filter
security-list
snmp-lock
The following table outlines the parameters for this command.
Table 43: mac-security parameters
auto-learning
disable|enable
filtering {enable|disable}
Avaya WLAN 8100 CLI Reference
Parameter
Configure MAC Auto-Learning
Disable MAC Address Security.
Enable MAC Address Security.
Enable/disable DA filtering
Enable/disable partitioning on intrusion detection
Set temporary partition time for intrusion detection.
Enable/disable MAC address learning
Modify ports participation in MAC address learning.
Add addresses to MAC security address table
Add/delete MAC DA filtering addresses
Modify security list port membership.
Enable/disable SNMP lock on MAC address security parameters.
Parameter
ACLI reference for wired networks
Description
Displays port membership of all security
lists.
Description
Configure MACE auto-learning
Disables or enables MAC address-based
security.
Enables or disables DA filtering on intrusion
detected.
August 2013 197