Avaya WLAN 8100 Series Reference page 20

ACLI reference for Wireless LAN (WLAN) 8100
2. Configure the capture profile parameters using the following commands.
20 Avaya WLAN 8100 CLI Reference
Note:
You can configure a maximum of 4 capture profiles on the AMDC.
Important:
After you complete the configuration, ensure that you synchronize configuration
across all controllers in the mobility domain.
Overview of the capture profile configuration commands.
WC8180(config-capture-profile)#?
Capture Profile Configuration Commands
default
direction
duration
end
exit
filters
interface
no
observer-ip
observer-port
profile-name
promisc-mode
snap-length
Configure the direction of the capture.
WC8180(config-capture-profile)#direction ?
both Transmit and receive
downlink Transmit only
uplink Receive only
Configure the duration of the capture.
WC8180(config-capture-profile)#duration ?
<0-86400> Enter capture duration in seconds
Configure filters for the capture.
WC8180(config-capture-profile)#filters ?
Set filters for the packet capture profile
client-mac
include-beacons
include-control
include-data
include-mgmt
in the capture data
include-probes
ssid
Configure radio interfaces for the capture.
WC8180(config-capture-profile)#interface ?
a-radio
all
b-radio
Configure the IP address of the observer host PC.
WC8180(config-capture-profile)#observer-ip ?
ipaddr IP address of Observer machine
Comments? infodev@avaya.com
Set a command to its default values
Filter capture by flow direction
Stop after elapsed duration in seconds
End wireless capture configuration mode
Exit from wireless capture configuration mode
Set filters for the packet capture profile
Specify the capture interface(s) for the packet capture
Disable capture profile parameters
IP address of the observer host
L4 port on the observer host
Name of the profile
Enable promiscuous capture on selected interfaces
Truncate capture to a specified length (in bytes)
Filter capture by client-mac
Include 802.11 beacons in capture data
Include 802.11 control frames in capture data
Include 802.11 data in capture data
Include 802.11 mgmt frames other than probes/beacons
Include 802.11 probes in capture data
Filter capture by ssid
5.0 GHz radio interface only
All radio interfaces
2.4 GHz radio interface only
August 2013