Avaya WLAN 8100 Series Reference page 211

default snmp-server community command
The default snmp-server community command restores the community string
configuration to the default settings.
The syntax for the default snmp-server community command is
default snmp-server community [ro|rw]
The default snmp-server community command executes in the Global Configuration
mode.
If the read-only or read-write parameter is omitted from the command, then all communities
are restored to their default settings. The read-only community is set to Public, the read-write
community is set to Private, and all other communities are deleted.
The following table describes the parameters for this command.
Table 53: default snmp-server community command parameters
Parameters
ro|rw
no snmp-server contact command
The no snmp-server contact command clears the sysContact value.
The syntax for the no snmp-server contact command is
no snmp-server contact
The no snmp-server contact command executes in the Global Configuration mode.
default snmp-server contact command
The default snmp-server contact command restores sysContact to the default
value.
The syntax for the default snmp-server contact command is
default snmp-server contact
The default snmp-server contact command executes in the Global Configuration
mode.
snmp-server command
The snmp-server command enables or disables the SNMP server.
The syntax for the snmp-server command is:
snmp-server {enable|disable}
The following table describes the parameters for this command.
Avaya WLAN 8100 CLI Reference
Description
Restores the read-only community to Public, or the read-
write community to Private.
ACLI reference for wired networks
August 2013 211