Avaya WLAN 8100 Series Reference page 347

Procedure
Reset QoS to factory defaults by using the following command from Global
Configuration mode.
qos agent reset-default
Configuring QOS AQ mode
About this task
This procedure describes how to configure the QoS Agent NT mode.
Procedure
Configure QoS NT mode by using the following command from Global Configuration
mode.
qos agent aq-mode [pure|mixed|disable]
Variable
disable
mixed
pure
Configuring QoS UBP support
About this task
Use the following procedure to configure the UBP support level.
Procedure
Configure the UBP support level by using the following command from Global
Configuration mode.
qos agent ubp [disable|epm|high-security-local|low-security-
local]
Variable
disable
Avaya WLAN 8100 CLI Reference
Variable definitions
NT application traffic processing is disabled on all ports.
NT application traffic processing enabled on all port with egress DSCP
mapping.
NT application traffic processing enabled on all ports without egress DSCP
mapping.
Variable Definitions
QoS agent rejects information forwarded by other applications.
ACLI reference for wired networks
Value
Value
August 2013 347