Avaya WLAN 8100 Series Reference page 57

5. Run the config-sync command to make Auto-RF fully operational:
6. (Optional) You can perform additional Auto-RF verification by reviewing the
Managing Auto-RF operations
CLI reference:
WC8180#wireless auto-rf ?
Auto-rf actions
channel-plan
power-plan
WC8180#wireless
a-n 802.11 a/n radio frequency band
bg-n 802.11 b/g/n radio frequency band
WC8180#wireless
start Run proposed power adjustmnent algorithm
About this task
This following procedure is used to manage automatic radio frequency functionality.
Procedure
1. Enter Privileged mode of the CLI.
2. Use the command wireless auto-rf channel-plan {a-n | b/g-n}
Avaya WLAN 8100 CLI Reference
AP MAC
..........
Radio 1
Channel
Power
..........
Radio 2
Channel
Power
...........
-------------------------------------------------------
......
......
WC8180#wireless controller config-sync
databases used by Auto-RF:
• Verify that RF Scan is working properly and collecting neighbor information:
WC8180#show wireless
• Check the neighbor APs detected, both domain and non-managed APs:
WC8180#show wireless
• Check specific neighbor relations detected by APs:
WC8180#show wireless
Perform auto-rf channel plan actions
Perform auto-rf power plan actions
auto-rf channel-plan ?
auto-rf power-plan ?
start to run the channel adjustment algorithm.
ACLI reference for the Wireless LAN (WLAN) 8100
: 00:1B:4F:6C:01:00
: Automatic Adjustment
: Automatic Adjustment
: Automatic Adjustment
: Automatic Adjustment
security wids-wips
ap neighbor-ap
rrm neighbors
rf-scan
all
August 2013 57