Ah10Copm-5A - Delta AH500 Programming Manual

Error
code
16#A4F3 Configuration error
16#A4F4 GPIO detection error
AH10PFBS-5A enters the mode of
16#A4F5
factory test.
1. AH10PFBS-5A has not been
connected to the
PROFIBUS-DP network.
2. PROFIBUS-DP master has
16#A4F6
not configured AH10PFBS-5A
slave or the configured node
address of AH10PFBS-5A is
inconsistent with that of the
actually connected one.

7.1.11 AH10COPM-5A

Error
code
AH10COPM-5A does not send a heartbeat
16#A0B0
message after a set period of time.
The length of a PDO that a slave station sends is
16#A0B1
not the same as the length of the PDO set in the
node list.
The master station selected does not send a node
16#A0B2
guarding message after a set period of time.
AH10COPM-5A receives an emergency message
16#A0E0
from a slave station.
The length of a PDO that a slave station sends is
16#A0E1
not the same as the length of the PDO set in the
node list.
AH10COPM-5A does not receive a PDO from a
16#A0E2
slave station.
16#A0E3 An automatic SDO is not downloaded successfully.
16#A0E4 A PDO parameter is not set successfully.
16#A0E5 A key parameter is set incorrectly.
The actual network configuration is not the same as
16#A0E6
the network configuration set.
The control of the errors in a slave station is not sent
16#A0E7
after a set period of time.
The master station address is the same as a slave
16#A0E8
station address.
No slave station is added to the node list in
16#A0F1
CANopen builder.
16#A0F3 An error occurs in AH10COPM-5A.
16#A0F4 The bus used is off.
Description
Description
Ch a pt er 7 Er r or C o des
LED indicator status
CPU
BUS FAULT RUN
The red light is The green light
ON. is ON.
The red light is The green light
ON. is ON.
The red light is The green light
ON. is ON.
The red light is The green light
ON. is ON.
LED indicator status
CPU
BUS FAULT
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
MODULE
NET
The green light
is ON.
The green light
is ON.
The green light
is ON.
The red light is
ON.
MODULE
ERROR
The red light
flashes twice.
OFF
The red light
flashes twice.
OFF
OFF
OFF
OFF
OFF
OFF
OFF
The red light
flashes twice.
OFF
OFF
OFF
The red light is
ON.
7 - 2 9